Wear and tear
Humidity, heat, shocks, cleaning, load and opening frequency
Materials and finishes · Benalmádena
Choosing materials for made-to-measure furniture
A timber look can be achieved in several ways, each with different maintenance and cost. We explain those differences in the context of your project.
The choice is part of the project
The best material is the one that suits the way the furniture will be used
We do not recommend finishing in isolation. The same look may require a different base, edge or hardware depending on the room and frequency of use.
Design and light
Colour, texture, grain, sheen and relationship with floors and walls
Maintenance
Ease of cleaning, repair and performance over time
Planned investment
We prioritise what adds value to use and avoid unnecessary extra costs
Direct consultation · Recommendation by project · No obligation
Tell us what furniture you need
A manager will review the use, the space and your references to guide you on the appropriate materials
Material families
Options with which we can manufacture
This guide explains the common possibilities. Availability, brand, collection, tone and final specification are confirmed with your project manager
Technical melamines
A versatile solution for interiors of wardrobes, kitchens, living rooms and furniture for daily use. They offer a wide variety of colours, woods and textures with easy maintenance
The manager confirms adequate quality, thickness, edge and resistanceLacquered MDF
Allows smooth surfaces, custom colours and machined fronts. It is common when looking for a continuous, matte or satin composition, with greater design freedom.
The type of lacquer and the preparation are defined according to the piece and its use.natural timber veneer
It provides grain and natural warmth with greater dimensional stability than a solid piece. It is suitable for living rooms, bedrooms, offices and projects with a more architectural presence.
We select species, cut, tone and varnish togethersolid timber
It is used in fronts, structures, mouldings, countertops or details where its resistance and character add value. Its natural performance must be considered from the design
The project manager explains where it makes technical and economic senseHPL and laminates
High resistance surfaces for areas exposed to friction, humidity or frequent cleaning. Available in colours, mineral designs, woods and technical finishes
The specification depends on the room and the support usedplywood
Stable structural board with characteristic edge, useful in certain technical solutions, visible interiors and furniture with contemporary appearance
Class, thickness and finish are assessed for each applicationGlass, mirror and metal
They complement display cases, doors, shelves, dividers and decorative details. They can provide lightness, reflection, transparency or contrast within the same piece of furniture.
Safety, weight, fixing and maintenance are reviewed before defining themHardware and accessories
Hinges, guides, lifts, sliding systems, lighting and interior organisation determine the operation as well as the exterior finish.
The manager sizes them according to load, opening and frequency of useMaterials advice
How do we arrive at a suitable proposal?
You don't need to know brands or specifications. With photographs, a reference and an idea of use we can begin a practical material review
- 01We understand the project
We review the stay, approximate measurements, use, visual references and priorities
- 02We discard what is not appropriate
We filter options by humidity, resistance, cleaning needs, weight, light and budget
- 03We present coherent alternatives
We explain relevant differences and propose comparable combinations
- 04We validate before manufacturing
Finishes, edges, hardware and details are defined in the final proposal
Common questions
What you should know before choosing
The exact answer depends on the type of furniture and the conditions of the home.
Can I submit a Pinterest reference or photo?＋
Yes. It helps us understand the appearance you have in mind. The manager will translate this reference into materials, thicknesses, finishes and systems that can be manufactured and installed in your space.
Is there a recommended material for the entire home?＋
Not necessarily. Kitchen, bathroom, bedroom and living room have different demands. We can maintain a coordinated aesthetic using different specifications where necessary
Can I see colours and samples before deciding?＋
Representative samples are compared once the project has a clear technical and visual direction. This is how we compare truly compatible alternatives and not complete catalogues without context
Does the material change the budget a lot?＋
It has an influence, but so do the measurements, the number of modules, the fittings, the machining and the fitting. The manager will tell you where it is worth investing and where there is a more efficient alternative
A project grounded in the property
Good furniture starts with a more precise conversation
Local knowledge helps with logistics, but the room still decides the design. We treat the address in Benalmádena as the start of an investigation, never as a shortcut to a standard answer.
Begin with what is not working
A sketch is welcome, but it is not compulsory. Room photographs, retained finishes and a realistic account of day-to-day use usually reveal enough to separate the immediate need from ideas that can wait.
Reference images help us read taste, not copy dimensions. We mark what you like about them—perhaps the calm fronts, open display or timber tone—and test only that idea against the room.
The survey has a purpose
Older walls are rarely perfect and recent renovations can hide their own surprises. The measured visit records the useful irregularities, not merely the largest number on each wall.
Where another trade will move a service or finish a wall, the responsibility and timing are written down. Measuring an unfinished condition without that note would create false confidence.
Choose from a shortlist, not a wall of samples
A convincing sample is one that still makes sense beside the floor, doors and light that will remain. We also confirm what supports it, how edges are finished and which hardware carries the load.
Interiors deserve the same thought as fronts. Shelf spans, drawer bottoms, ventilation and edge quality influence how the furniture feels long after installation day.
Access is part of the design
We note the route, surfaces that need protection and any other work still active in the property. That information gives the workshop a realistic assembly plan.
For houses, we may be planning several floor changes. For flats, the lift and corridor often set the practical limit. Neither should be left to the delivery team to discover.
Priorities make the quotation clearer
We separate essentials from optional details and state what the quotation includes. If a premium finish absorbs money without improving the brief, we will say so.
For a sound material specification, we can identify the decision that drives most of the cost and explain it before smaller choices distract from the total.
What happens after the first review
After reviewing the information, we tell you what is viable, what is still uncertain and whether a measured visit is the right next step. There is no need to stage the room before sending photographs.
Before production, the confirmed information is brought together. Scattered messages are useful during discussion, but the workshop works from one current set of decisions.
Direct consultation · Recommendation by project · No obligation
Tell us what furniture you need
A manager will review the use, the space and your references to guide you on the appropriate materials